You need to take 2-3 minutes to heat up before using. And the temperature setting should be 160 ? and above, then steam function can work.
You should immediately close the spray switch if there is no water in water tank, if not, the atomizing sheet of the water tank will be easily damaged.
Using pure water, do not mix essential oils to use. Otherwise, it is easy to cause small spray or clogging problem of the atomizing sheet.
If there is no spray during use, please check if there is no water or the spray switch is not on or the atomizing sheet is clogged. If the atomizing sheet is clogged, wipe it with a cotton swab or remove the water tank and swing it.
The atomizing sheet has an aging problem, it is recommended to change it once every six months to ensure the normal use of spray function.
To avoid scalding, do not allow the heating surface to contact with bare skin, and do not face high temperature steam while the steam function is on.
Separate Steam Switch: you can select spray or no spray effect by opening or closing the switch. Need 2-3 minutes to heat up before using steam. And the temperature setting should be 160 ? and above, then steam function can work. It is recommended to replace the spray tank every six months to make sure the steam function works well.
Thermal conductivity material: Tourmaline ceramic
Heating elements: PTC
Applicable hair: Dry and wet
Temperature: 120?~200? adjustable(5 files)
Power cord tail assembly mode: 360° rotatable
Cord length: Approx. 2m(EU plug) 1.7m(US plug)
5 Level Temperature Adjustment: temperature can be adjusted from 120?-140?-160?-180?-200? with LED Display, can meet the needs of different hair.
Fast Heating: PTC heating elements, 3D floating plate with tourmaline ceramic coating, reduce hair loss and damage.
Steam Function: poured out suitable water steam to moisturize your hair, keep your hair from high temperature damage, and repair dry hair and make hair shiny.
Separate Steam Switch: you can select spray or no spray effect by opening or closing the switch. Need 2-3 minutes to heat up before using steam. And the temperature setting should be 160 ? and above, then steam function can work.
360 Degrees Swivel Power Cord: you can rotate it at any angle without worry about winding.